Clay

Sculpture Mix is a very plastic body using a high percentage of super duty refractory 20 mesh grog, giving this body a rugged strength from start to finish. Sculpture Mix is excellent for slab construction and recommended for sculpting where small or large pieces are required which will not slump. Sculpture Mix can be thrown on a wheel for those requiring that extra toothy clay. Highly recommended for raku firing. ...

A heavily grogged, off-white clay body designed specifically for the extreme demands of sculptural work. It is also a good throwing body because it is plastic and does not have very large grog. Due to its strength, it is also excellent for Raku and other special firing methods.

Buff Red Body � Quite Smooth. Great Throwing Clay.

The Sedona Red Clay is a rich red color before and after firing. It has excellent plasticity for all methods of clay modeling: slab, coil, pinching, and even wheelthrowing. Does not slump or warp at low temperatures like other red clays. The firing range can extend up to Cone 02. AP (Approved Product) seal in moist form CL (Caution Label) seal for safety in dry form Bisque is red at Cone 06 and a rich red brown at Cone 02 AMACO� glazes maturing at Cone 05 can be used with this clay. Colored...

SMOOTH SCULPTURE CLAY, is a high fire sculpture clay blended to be smooth, yet strong. Fires off white. It sticks well to itself for fine detail sculpting, with extra fine grog. The addition of 200 mesh Mullite & Kyanite create the perfect SMOOTH clay for sculpting, with lower shrinkage, and greater warp/crack resistance. Smooth Sculpture also throws well!

This clay is the same formula as Soldate-30, but contains finer 60 mesh sand. The texture is medium coarse.

Smooth, off white clay. Excellent for functional ware.

Clay body specifically formulated by request from Midwest and Eastern U.S. potters. Low in sand and grog content, special buff is smooth textured. An excellent throwing body. The color palette is perhaps best described as 'desert' or 'Southwest'. Fired in oxidation, Special Buff falls into the tan/brown color range.

Clay body specifically formulated by request from Midwest and Eastern U.S. potters. Low in sand and grog content, speckled buff is smooth textured. An excellent throwing body. The color palette is perhaps best described as 'desert' or 'Southwest'. Fired in oxidation, Speckled Buff falls into the tan/brown color range.

Stoneware #5 fires to a medium buff in oxidation and a toasted tan in reduction. Stoneware #5 contains a fine silica sand formulated to produce an especially good wheel clay and rugged vitreous stoneware pottery. Recommended for dinnerware. A favorite of many professional studio potters.

Stoneware 1-C fires to a sandstone color in oxidation and a brown in reduction. Stoneware 1-C contains a fine silica sand to make an excellent smooth textured wheel clay which will produce vitreous stoneware pottery within the temperature range of an electric kiln. Stoneware 1C will give the appearance of a cone 10 reduction clay body when fired to cone 5 in oxidation.

Versatile body. At Cone 06 it has a pleasing earthen color (not pink) with about 9% absorption, making it an ideal general purpose school clay with light grog and sand. At Cone 2 it is a true classic Terracotta color and about 5% absorption.

This coarse, sandy, red clay was specifically formulated for sculpture work. It is also an excellent clay for throwing on the wheel. It has exceptional strength and fires to a rich red/orange color.

Venus is a highly plastic smooth midrange white stoneware with EXTRA FINE grog so smooth you can't even feel it.Superb for wheel thrown functional ware. Also great for slab built small & medium size work. Fires bone white, with great density & strength.

This clay has been specifically formulated to be a very smooth, slow drying clay for modeling. It is used primarily by design studios and the entertainment industry for modeling, design, mock-up and tooling. Not formulated to be fired.

This is an all-purpose, smooth modeling clay. It is an excellent clay for beginning techniques such as coil and slab building. The white color makes it an ideal clay for use with low fire glazes.

White Art Clay is an extremely plastic low fire clay that is ideal for wheelthrowing, handbuilding, and modeling. Its versatile nature makes it perfect for all skill levels. AMACO� glazes maturing at Cone 05 and decorating colors are recommended for decoration AP (Approved Product) seal in moist form CL (Caution Label) seal for safety in dry form Fires white - allows opaque and transparent glazes and underglazes to retain their true color and brilliance Wider firing range - from Cone 04 to...

This low fire, white earthenware body has good throwing qualities and fires very strong and white.

Same clay as Whiteware with grog added. A favorite in classroom and excellent for both hand building and wheel work.

A grolleg kaolin formulated Cone 10 porcelain excellent for large or small forms. Translucent when construction is thin and fired to Cone 10. The color is white in oxidation and off-white in reduction.

An interesting light gray body with fine sand. A Cone 10 (and higher) clay which fires off-white in oxidation and gray/white in reduction. Also good for Raku at low temperature. Care should be taken at high fire use in functional ware. Slightly open body even at Cone 10.

ANETO is a translucent white porcelain which stands out for its high plasticity, and makes it exceptional for wheel-throwing and modelling. Its formula is very stable and provides a secure firing range between 1230 and 1270�C. Suitable for tableware (food-safe), according to ISO 6486. Available in extruded body (moist form). Presented in a practical 5 kg cylindrical format with double packaging. Firing range: 1230-1270�C / Cone 6-8 Biscuit temperature: 1000�C / Cone 06 Water content: 21%...

BLACK ICE is a black porcelain noted for its beautiful black graphite. It has high plasticity, which makes it ideal for wheel-throwing and modelling. Its formula is very stable and provides a secure firing range between 1200 and 1240�C (oxidizing atmosphere). Suitable for tableware (food-safe), according to ISO 6486. Available in extruded body (moist form). Presented in a practical 5 kg cylindrical format with double packaging. Firing range: 1200-1240�C / Cone 6-7 Biscuit temperature: 1000�C /...

UPSALA is a unique blue porcelain noted for its beautiful cobalt blue. It has high plasticity, which makes it ideal for wheel-throwing and modelling. Its formula is very stable and provides a secure firing range between 1200 and 1240�C (oxidizing atmosphere). Suitable for tableware (food-safe), according to ISO 6486. Available in extruded body (moist form). Presented in a practical 5 kg cylindrical format with double packaging. Firing range: 1200-1240�C / Cone 6-7 Biscuit temperature: 1000�C /...

Grey stoneware clay with 40% impalpable grog 0-0.2 mm (up to 80 Mesh). Formulated for artistic ceramics, it is ideal for throwing and modelling smooth pieces with fine details. The high content of grog confers an excellent behaviour during drying and firing. Depending on the firing temperature, it develops an interesting range of greys, from cement to dark grey, which satisfies the most avant-garde trends in artistic ceramics. Suitable for tableware (food-safe), according to ISO 6486....

Black stoneware clay with 40% impalpable grog 0-0.2 mm (up to 80 Mesh). Formulated for artistic ceramics, it is ideal for wheel-throwing and modelling smooth pieces with fine details. The high content of grog confers an excellent behaviour during drying and firing. Its beautiful and intense black firing colour in oxidising atmosphere is very exclusive of PRN range and becomes an ideal artistic mean of expression. In reducing atmosphere, metallic effects with shades of blue are obtained....

Grey sculpture clay with 40% fine grog 0-0.5 mm (up to 35 Mesh). Formulated for artistic and decorative ceramics, it is ideal for sculpture and pieces for outdoors (garden pots, tiles, etc.). The high content of grog confers a beautiful textured surface and an excellent behaviour during drying and firing. Depending on the firing temperature, it develops an interesting range of greys, from cement to dark grey, which satisfies the most avant-garde trends in artistic and decorative ceramics....